Test Prober Engineer
Test Prober Engineer
Jagiroad, AS, IN
Jagiroad, AS, IN
About the Business:
Tata Electronics Private Limited (TEPL) is a greenfield venture of the Tata Group with expertise in manufacturing precision components.
Tata Electronics (a wholly owned subsidiary of Tata Sons Pvt. Ltd.) is building India’s first AI-enabled state-of-the-art Semiconductor Foundry. This facility will produce chips for applications such as power management IC, display drivers, microcontrollers (MCU) and high-performance computing logic, addressing the growing demand in markets such as automotive, computing and data storage, wireless communications and artificial intelligence.
Tata Electronics is a subsidiary of the Tata group. The Tata Group operates in more than 100 countries across six continents, with the mission 'To improve the quality of life of the communities we serve globally, through long term stakeholder value creation based on leadership with Trust.’
Responsibility:
-
Responsible for ensuring the smooth and efficient operation of test equipment and hardware.
-
Responsible for troubleshooting, calibration, repair and maintenance of Testers and
Handlers / Probers platforms. Ensure equipment are in production condition with minimum downtime and running at yield specified
Responsible for tracking, monitoring and reporting daily equipment downtime
-
Support test hardware maintenance and setup for engineering activities and production ramp-up, performing required test correlation and assist in new test equipment move-in and buy-off.
-
Follow protocols to ensure quality control and optimal test equipment performance.
-
Identify the cause of machine problems and implement permanent measures.
-
Conduct machine ESD, grounding check and implement measures to ESD check findings.
-
Collaborate with engineers to diagnose issues and improve systems.
-
Document testing procedures and results to improve equipment utilization.
-
Responsible for maintenance and repair on any of the following equipment such as Laser Mark, UV-cure, AOI, TnR, Vision Systems, Inspection Station and Packing station.
-
Provide technical support to manufacturing that includes machine conversion, device setup and line sustaining.
-
Ensures 100% support to engineering group on device & recipe creation, equipment buy-off, evaluations, qualifications and support new product introduction NPI.
-
Communicates with Manufacturing, Process, QA, Central Engineering (NPI), Pre-assy, to solve issues involving other group.
-
Perform any other duties assigned by Supervisor or Manager from time to time.
-
To evaluate and buy off new handler / TCU for next generation of project road map.
-
Hands on experience to setup, PM, troubleshooting in various handlers Hontech (HT1028c/HT9046LS/AT, HT1032), Delta Eclipse, Seiko Epson, Synax2400.
-
Identify the root cause and implement corrective action analysis for issues that arise during assembly of systems and provides failure analysis report as required.
-
To Innovate and provide solutions of single site engineering handler ATE/SLT/Bench team for Automation, Process improvement, Thermal management.
-
Review, develops and approves appropriate PM procedures and checklist to improve operational performance of system equipment Plan consumables and spare parts to be available to service equipment.
-
Strong knowledge in Probe Process and Equipment Engineering research and develop ways to manufacture products and monitor existing processes and products for quality and efficiency.
-
Knowledge in handling and maintaining Probe test equipment , create new receipe and prober.
Essential Attributes:
-
Possess trouble shooting skills on equipment maintenance and repair.
-
Familiar with the ATE’s like Advantest V93K,T2000 , Teradyne(ETS364, ETS 88,J750 ,Ultraflex) , Cohu tester platform.
-
Familiar with TEL -P8,P12, Prexa, Precio , Accretech/TSK , and OPUS, SEMICS prober operation.
-
Familiar with Turret- SRM , Existech , Hontech,Cohu and Pick-n-Place handler operation.
-
Strong troubleshooting and analytical skills to resolve technical problems, set up experiments, and perform data analysis.
-
Excellent communication, teamwork, and people skills are required.
-
Comfortable working in shifts and cleanroom environment.
Education Qualification:
- Minimum Diploma in Electrical and Electronic Engineering or equivalent.
Qualifucation:
-
Minimum 6 to 8 years of experience
-
Specialized knowledge of equipment, testers, handlers, probers, etc is preferred.
About the Business:
Tata Electronics Private Limited (TEPL) is a greenfield venture of the Tata Group with expertise in manufacturing precision components.
Tata Electronics (a wholly owned subsidiary of Tata Sons Pvt. Ltd.) is building India’s first AI-enabled state-of-the-art Semiconductor Foundry. This facility will produce chips for applications such as power management IC, display drivers, microcontrollers (MCU) and high-performance computing logic, addressing the growing demand in markets such as automotive, computing and data storage, wireless communications and artificial intelligence.
Tata Electronics is a subsidiary of the Tata group. The Tata Group operates in more than 100 countries across six continents, with the mission 'To improve the quality of life of the communities we serve globally, through long term stakeholder value creation based on leadership with Trust.’
Responsibility:
-
Responsible for ensuring the smooth and efficient operation of test equipment and hardware.
-
Responsible for troubleshooting, calibration, repair and maintenance of Testers and
Handlers / Probers platforms. Ensure equipment are in production condition with minimum downtime and running at yield specified
Responsible for tracking, monitoring and reporting daily equipment downtime
-
Support test hardware maintenance and setup for engineering activities and production ramp-up, performing required test correlation and assist in new test equipment move-in and buy-off.
-
Follow protocols to ensure quality control and optimal test equipment performance.
-
Identify the cause of machine problems and implement permanent measures.
-
Conduct machine ESD, grounding check and implement measures to ESD check findings.
-
Collaborate with engineers to diagnose issues and improve systems.
-
Document testing procedures and results to improve equipment utilization.
-
Responsible for maintenance and repair on any of the following equipment such as Laser Mark, UV-cure, AOI, TnR, Vision Systems, Inspection Station and Packing station.
-
Provide technical support to manufacturing that includes machine conversion, device setup and line sustaining.
-
Ensures 100% support to engineering group on device & recipe creation, equipment buy-off, evaluations, qualifications and support new product introduction NPI.
-
Communicates with Manufacturing, Process, QA, Central Engineering (NPI), Pre-assy, to solve issues involving other group.
-
Perform any other duties assigned by Supervisor or Manager from time to time.
-
To evaluate and buy off new handler / TCU for next generation of project road map.
-
Hands on experience to setup, PM, troubleshooting in various handlers Hontech (HT1028c/HT9046LS/AT, HT1032), Delta Eclipse, Seiko Epson, Synax2400.
-
Identify the root cause and implement corrective action analysis for issues that arise during assembly of systems and provides failure analysis report as required.
-
To Innovate and provide solutions of single site engineering handler ATE/SLT/Bench team for Automation, Process improvement, Thermal management.
-
Review, develops and approves appropriate PM procedures and checklist to improve operational performance of system equipment Plan consumables and spare parts to be available to service equipment.
-
Strong knowledge in Probe Process and Equipment Engineering research and develop ways to manufacture products and monitor existing processes and products for quality and efficiency.
-
Knowledge in handling and maintaining Probe test equipment , create new receipe and prober.
Essential Attributes:
-
Possess trouble shooting skills on equipment maintenance and repair.
-
Familiar with the ATE’s like Advantest V93K,T2000 , Teradyne(ETS364, ETS 88,J750 ,Ultraflex) , Cohu tester platform.
-
Familiar with TEL -P8,P12, Prexa, Precio , Accretech/TSK , and OPUS, SEMICS prober operation.
-
Familiar with Turret- SRM , Existech , Hontech,Cohu and Pick-n-Place handler operation.
-
Strong troubleshooting and analytical skills to resolve technical problems, set up experiments, and perform data analysis.
-
Excellent communication, teamwork, and people skills are required.
-
Comfortable working in shifts and cleanroom environment.
Education Qualification:
- Minimum Diploma in Electrical and Electronic Engineering or equivalent.
Qualifucation:
-
Minimum 6 to 8 years of experience
-
Specialized knowledge of equipment, testers, handlers, probers, etc is preferred.